Mounting Threads : 4 BA x 5 Deep or M 3.5 x 4 mm Deep
N.B. : Below mentioned Dimensions pertain to 5 way switch with standard slit shaft. GENERAL TOLERANCE: 0.5 mm

Front Mounting Double Mounting Rear Mounting
A 15.0 15.10 15.0
B 22.22 CTC 0.15 22.22 CTC 0.15 22.22 CTC 0.15
C 40.50          0.8 44.96          0.8 44.96          0.8
D 36.58 36.58 36.58
E 19.70 19.70 25.0
F 52.07           MAX 52.07           MAX 52.07           MAX
G 20.0 25.40 20.0
H 7.93            0.03 7.93            0.03 7.93            0.03
I 5.00             -0.05 5.00             -0.05 5.00             -0.05
Electrical rating and tests :
a) Current rating : 2A
b) H.V. Tests : 2 KV for one minute
c) Insulation resistance : More than 100 MEGA OHMS
d) Contact resistance : Less than 50 MILLI OHMS
e) Moisture resistance : More than 10 MEGA OHMS after a cycle of 48 hours at 95% RH
  1. I.S.I. Approved, Phenol Formaldehyde (Electrical grade) which confirms to grade 3 of IS 1300: 1966, type GX of BS 771: 1959 & type 31 of DIN is used for the manufacture of contact top platess it imparts excellent Electrical properties.
  2. Melamine Formaldehyde with Alpha Cellulose Filter is used for spacer the grade used confirms to IS 3669: 1966 Type M of BS 1322 of 1975 and type 152.7 DIN 7708, it ensures very high insulation & anti-tracking properties.
  3. The cam-shafts are moulded from Nylon-6 for superior Structural rigidity.
  4. The contacts (20 SWG - 0.914 mm) are made of brass and nickle plated. The screws are zinc passivated to prevent corrosion.
  5. The rollers are made from extruded brass rods to ensure that they do not bend or shear during assembly or on operation.
  6. Inspection at all stages of manufacture ensures perfect fit and finish.
  7. The switches are exceptionally smooth in operation and hence have very long life. (15,000 Cycles at Full load)